University of Pittsburgh Grading System
Pitt uses a 4.00 GPA scale for every letter grade on record. A+ and A both carry 4.00 points, and no single percentage table applies campus-wide, since departments set their own ranges. This chart, the formula behind it, and Pitt’s honors thresholds sit below in full.
University of Pittsburgh: History, Enrollment, and Academic Standing
Hugh Henry Brackenridge founded Pitt as Pittsburgh Academy on February 28, 1787. The school became Western University of Pennsylvania in 1819, then took its current name in 1908 after moving to the Oakland neighborhood.
Pitt operates as a public, state-related research university and holds membership in the Association of American Universities. Fall 2025 enrollment reached 35,528 students across the system, split between 25,679 undergraduates and 9,849 graduate students.
The Pittsburgh campus spans 132 acres and houses 16 schools and colleges. Four regional campuses (Bradford, Greensburg, Johnstown, and Titusville) round out the university. Acceptance sits near 58% for incoming undergraduates.
This scale and record set the stage for how Pitt converts coursework into a GPA.
What Is the University of Pittsburgh’s Grading Scale?
Pitt’s grading scale runs on a 4.00 maximum, with A+ and A both worth 4.00 quality points. Letter grades drop in 0.25-point increments from there: A- sits at 3.75, B+ at 3.25, and so on down to F at 0.00. The Office of the Provost sets this scale for every school on campus, though individual instructors decide how a raw score converts into a letter.
Pitt runs on a decentralized model. That means the university publishes one official point scale, but percentage cutoffs for each letter grade live inside a course syllabus, not a university-wide policy. A 91% in one class and a 91% in another can land on different letters depending on the professor.
Pitt’s Official Letter Grade to GPA Chart
The table below lists every grade the Office of the Provost recognizes, alongside its quality-point value.
Letter Grade | Quality Points | Attainment Level |
|---|---|---|
A+ | 4.00 | Superior |
A | 4.00 | Superior |
A- | 3.75 | Superior |
B+ | 3.25 | Meritorious |
B | 3.00 | Meritorious |
B- | 2.75 | Meritorious |
C+ | 2.25 | Adequate |
C | 2.00 | Adequate |
C- | 1.75 | Adequate |
D+ | 1.25 | Minimal |
D | 1.00 | Minimal |
D- | 0.75 | Minimal |
F | 0.00 | Failure |
Pitt’s 4.0 GPA scale matches the standard most US universities publish, so grades transfer cleanly between institutions on this same ceiling. B+ sits at 3.25 here, not the 3.30 some schools use, and A- lands at 3.75 rather than 3.70. Small gaps like these change a transcript’s final number, so pulling the exact chart before a calculation matters.
How Pitt Calculates GPA
Pitt calculates GPA by dividing total quality points by total GPA credit hours attempted. Each course multiplies its credit value by the grade’s point value to produce quality points, then the university sums every course and divides by total credits. This formula runs the same way for a single term and for a full academic career.
Here’s a worked example. A student earns an A (4.00) in a 3-credit course and a B+ (3.25) in a 4-credit course. The A course produces 12.00 quality points, the B+ course produces 13.00, and the total of 25.00 quality points divides by 7 credits for a 3.57 GPA.
Running this by hand works for a single term, but a full transcript with a dozen courses gets tedious fast. Our GPA calculator applies this exact formula and returns a term or cumulative GPA in seconds, using the same quality-point values from the chart above.
Why Pitt Has No Universal Percentage-to-Letter-Grade Scale
Pitt doesn’t publish one percentage-to-letter-grade table for the entire university, because grading authority sits with individual schools and instructors. A syllabus in the Dietrich School might set 93% as the A cutoff, while a Swanson Engineering course sets it at 90%. Students on Reddit’s r/Pitt community flag this same confusion often, since the assumption of a fixed scale doesn’t hold here.
Checking your own syllabus stays the fastest way to confirm your letter grade. For a general estimate before that information arrives, the percentage-to-GPA calculator converts a raw score against common grading patterns.
Alternative Grading Options: H/S/U, S/NC, and Audit
Pitt offers grading bases beyond the standard letter scale for eligible courses. H/S/U (Honors/Satisfactory/Unsatisfactory) marks H for A- level work and above, S for C through B+ work, and U for anything below C-. Neither H nor S adds quality points to your GPA, though both count toward graduation credit.
S/NC (Satisfactory/No Credit) works on a similar split: S generally reflects C-level work or better, and NC reflects anything below that. Audited courses receive an N and carry no GPA weight or degree credit at all. Each of these options exists to let students take a course without a letter grade affecting their cumulative average.
Undergraduate vs. Graduate GPA Requirements
Pitt sets a 2.00 cumulative GPA minimum for undergraduate graduation and a 3.00 average for graduate program standing. An undergraduate below 2.00 after 12 quality-point credits risks academic probation, with suspension a possible next step depending on the school’s own rules. A graduate student whose GPA drops below 3.00 lands on probation automatically.
Individual schools layer on stricter requirements. Pitt’s College of Business, for example, requires a 2.25 minimum GPA within the major, not the general 2.00 standard. These thresholds sit below the honors range Pitt reserves for its top performers.
University Honors Thresholds: Cum Laude, Magna, Summa
Pitt grants three levels of undergraduate honors at graduation, each tied to a cumulative GPA band. Cum Laude starts at 3.25, Magna Cum Laude at 3.50, and Summa Cum Laude at 3.75. A student needs at least 60 letter-graded credits earned at Pitt to qualify for any tier.
A cumulative GPA close to one of these cutoffs is worth tracking closely through senior year, since a single low grade can shift a final average across the line. Comparing your current standing against a weighted GPA calculator from high school shows how different Pitt’s flat institutional scale looks against a weighted admissions GPA.
Course Repeats and Your GPA
Pitt applies the most recent grade earned when a course gets repeated, and excludes the earlier attempt from GPA calculations. The original grade stays visible on the transcript, so admissions committees and advisors see both attempts, but only the newer one carries quality points. A repeat completed through a W, R, or N grade doesn’t trigger this replacement, and the original grade keeps its weight.
Common Transcript Symbols Beyond Letter Grades
A Pitt transcript carries several non-letter symbols alongside standard grades. G marks unfinished coursework tied to circumstances outside a student’s control, usually with a one-year window to complete it. W marks withdrawal after the add/drop period and carries no GPA impact. R marks resignation from every course in a term, and I marks incomplete work tied to a course’s nature. None of these four symbols adds or subtracts quality points from a cumulative GPA.
Frequently Asked Questions
Is a 93% an A or B at Pitt?
Pitt doesn’t set one fixed percentage cutoff for any letter grade across the university. A 93% could land as an A in one course and a B+ in another, depending on the individual syllabus. Checking the grading breakdown your instructor posted stays the only reliable way to confirm.
Is a 3.7 GPA good for Pitt admissions?
A 3.7 GPA sits well above Pitt’s median admitted range and reflects strong academic performance on the 4.00 scale. Pitt’s acceptance rate runs near 58%, and a GPA this high pairs well with solid test scores and course rigor. Extracurricular strength and essay quality still factor into the final decision.
Does an S or NC grade lower my GPA?
Neither S nor NC carries quality points, so neither one raises or lowers a cumulative GPA. S adds credit toward graduation, while NC adds no credit at all. Both stay separate from the standard letter-grade calculation.
How do I calculate my Pitt GPA for one term?
Multiply each course’s credit hours by its quality-point value, add every course together, then divide by total credits attempted that term. A 3-credit A and a 4-credit B+ produce 25.00 quality points across 7 credits, for a 3.57 term GPA. Our GPA calculator runs this same formula automatically for any course combination.
Does a repeated course count twice in my GPA?
No. Pitt counts only the most recent grade earned in a repeated course toward GPA calculations. The original attempt stays on the transcript for reference, but its quality points drop out of the running total once the repeat posts.
Ready to see your exact number? Run your courses through our University of Pittsburgh GPA calculator and get a term or cumulative result in seconds, built on the same official scale Pitt’s Office of the Provost publishes.
Can't Find Your Calculator?
Use our standard CGPA to Percentage Calculator with multiple grading scales (4.0, 5.0, 10.0) for any university worldwide.