University of Michigan Grading System
The University of Michigan grading system runs on a 4.0 honor point scale across three separate campuses: Ann Arbor, Dearborn, and Flint. Letter grades range from A+ down to E, and each campus applies its own conversion nuances. Ann Arbor students use LSA or school-specific tables, and Dearborn uses a distinct catalog with its own grade-tier descriptions.
Does “University of Michigan” Mean Ann Arbor, Dearborn, or Flint?
“University of Michigan” covers three campuses, and each one publishes its own grading catalog. Ann Arbor runs the flagship campus, home to LSA, Ross, Engineering, and Rackham Graduate School. Dearborn and Flint operate as separate campuses with independent catalogs and separate registrar offices.
Ann Arbor’s grading rules live in the LSA and school-specific catalogs, not one shared document. Rackham graduate students follow different point conventions than undergraduates in LSA or Ross. Dearborn’s catalog adds descriptive achievement labels next to each letter grade, a layer Ann Arbor’s LSA page skips entirely.
A student checking “University of Michigan GPA” needs to confirm the campus first. The honor point values overlap closely across all three, but small differences in grade usage change GPA outcomes. Once the campus is confirmed, the 4.0 GPA scale applies the same math used at other US universities to that campus’s specific letter grades.
How Does Michigan’s 4.0 Honor Point Scale Work?
Michigan’s 4.0 honor point scale assigns a numeric value to each letter grade, and A+ or A sit at the top with 4.0 points for most undergraduate programs. B grades range from 2.7 to 3.3, C grades range from 1.7 to 2.3, D grades range from 0.7 to 1.3, and E equals 0.0. Ann Arbor and Dearborn use nearly identical point values.
Letter Grade | Honor Points |
|---|---|
A+ / A | 4.0 |
A- | 3.7 |
B+ | 3.3 |
B | 3.0 |
B- | 2.7 |
C+ | 2.3 |
C | 2.0 |
C- | 1.7 |
D+ | 1.3 |
D | 1.0 |
D- | 0.7 |
E | 0.0 |
Some units break from this table. Michigan’s Public Health school and certain Rackham graduate programs list A+ at 4.3 points instead of 4.0, even though the cumulative GPA still caps at 4.0. Engineering instructors at Dearborn skip the D- grade, and Education instructors there skip A+ entirely.
D- counts as the lowest passing grade in most departments, since it earns credit while E does not. This point structure feeds directly into how a student’s grade point average gets calculated each term.
How Is Michigan GPA Calculated?
Michigan GPA gets calculated by dividing total honor points by total graded credit hours, a formula the university calls Michigan Honor Points divided by Michigan Semester Hours. A 3-credit course graded B earns 9 honor points (3 credits × 3.0). A 4-credit course graded A earns 16 honor points (4 credits × 4.0).
The university adds up honor points across every graded course, then divides by the total number of credit hours elected. Courses graded Pass, Credit, Satisfactory, or Incomplete get excluded from this calculation entirely. Only standard letter-graded courses factor into the number.
This formula stays consistent for a student checking GPA after one term or across four years. Anyone tracking a running total between terms can compare the difference between cumulative GPA and semester GPA to see how each new term shifts the overall average. The next question most students ask involves percentages, since course syllabi list scores as numbers, not letters.
Is There a University-Wide Percentage-to-Letter Table?
No university-wide percentage-to-letter table exists at Michigan, and each department sets its own breakpoints for converting a numeric score into a letter grade. A 93% might land as an A in one course and an A- in another, based on the instructor’s syllabus. Informal 10% increments show up often, but they carry no institutional mandate.
Google’s own search results confirm this gap directly. Michigan leaves percentage-to-letter conversion to individual professors and departments across LSA, Engineering, and other schools, rather than publishing one fixed scale. A student asking “is 93% an A or B” needs their course syllabus, not a general Michigan-wide chart.
This department-level flexibility makes a general-purpose percentage-to-GPA calculator useful for a rough estimate, since it applies the common 90/80/70 breakpoints most instructors default to. The exact number still depends on the syllabus in front of the student. Grading flexibility extends beyond percentages too, reaching all the way into how entire terms get graded for incoming students.
What Changes Under the Fall 2027 LSA Pass/No Credit Pilot?
The Fall 2027 LSA Pass/No Credit pilot replaces external letter grades with Pass or No Credit markers for roughly 3,500 incoming LSA freshmen, and the change applies only to their first semester. Professors still assign standard letter grades internally, so students get feedback for advising and future applications. Michigan’s other 18 colleges, including Engineering and Ross, continue with standard letter grading.
External transcripts show only P or NC for that first semester under this pilot. Internal letter grades stay visible to advisors, scholarship committees, and the students themselves, since the university built the pilot around feedback preservation, not feedback removal. Neither Pass nor No Credit factors into cumulative GPA calculation.
A student outside LSA’s incoming freshman cohort sees no change from this pilot at all. Continuing LSA students, transfer students, and every student at Ann Arbor’s other colleges keep standard letter grading across every term. Later terms for these same freshmen also return to standard letter grading once the first semester ends, which raises a separate question about how Pass/Fail differs from this new pilot.
How Does Pass/Fail Differ From the New P/NC Pilot?
Pass/Fail differs from the new P/NC pilot because Pass/Fail is a standing option any eligible student can elect on a course-by-course basis, while the pilot applies automatically to an entire semester for one incoming class. Under Pass/Fail, grades A through C- convert to P on the transcript. Grades D+ through E convert to F.
Neither P nor F under the standing Pass/Fail option factors into GPA, mirroring how the 2027 pilot handles P and NC. The two systems diverge on scope and choice. Pass/Fail requires a student to opt in per course, while the pilot covers a full course load automatically for its target cohort.
Students on academic probation cannot elect Pass/Fail, and courses taken this way cannot count toward major, minor, or concentration requirements. Up to four Pass/Fail courses can still count toward total degree credit. This grade-conversion logic connects directly to how academic standing gets measured across a full term or year.
What GPA Do You Need for Good Academic Standing at Michigan?
Good academic standing at Michigan requires a minimum cumulative GPA of 2.0 for most undergraduate degrees, while Rackham Graduate School requires a minimum cumulative GPA of 3.0. Dean’s List recognition at the undergraduate level typically requires a semester GPA of 3.5 or higher, alongside at least 12 graded credit hours in that term. Falling under these thresholds can trigger academic probation.
A 2.0 cumulative GPA sits at the floor for undergraduate graduation eligibility, alongside credit hour minimums that vary by program. Graduate students in Rackham face a stricter 3.0 floor, since graduate coursework carries different performance expectations than undergraduate coursework. A student wondering what these numbers mean in context can compare them against a broader look at what counts as a good college GPA across US universities generally.
Academic standing reviews happen each term, and a GPA below these floors can lead to a formal warning before dismissal becomes a risk. Consistent performance above the floor protects a student’s standing without needing intervention. Standing calculations depend partly on how repeated courses factor into the running GPA total.
What Happens When You Repeat a Course at Michigan?
Repeating a course at Michigan means only the most recent grade counts toward cumulative GPA, even though every attempt stays visible on the transcript. Undergraduate and graduate students can repeat a course up to two times, for three attempts total. If a student repeats a course a third time, the two earlier attempts drop out of the GPA calculation entirely.
This rule applies regardless of the new grade improving or worsening the outcome. A student who earns a C the first time and an A the second time sees only the A count. A student who earns a B the first time and a C the second time sees only the C count, since the university always uses the latest attempt.
Transfer credit from another institution, including Michigan’s other two campuses, does not factor into this repeat calculation or the broader cumulative GPA. This distinction matters for students moving between Ann Arbor, Dearborn, and Flint, since grades earned at one campus generally don’t transfer as GPA-affecting credit to another. Quality points and honor points work as the underlying vocabulary behind every calculation covered here.
Frequently Asked Questions
What grade is an A at UMich?
An A at UMich earns 4.0 honor points in most undergraduate programs across LSA, Ross, and Engineering. Some Rackham graduate programs and Public Health courses list A+ at 4.3 points, though the cumulative GPA still caps at 4.0.
Is a 93% an A or B?
A 93% lands as an A or A- depending on the individual course syllabus, since Michigan does not publish one university-wide percentage scale. Informal 10% increments are common, but each department sets its own exact breakpoint.
Is 70% C or D?
A 70% typically falls in the C range under common informal breakpoints, though the exact letter depends on the instructor’s published syllabus. No campus-wide policy fixes this number across every department.
What is a B+ UMich GPA?
A B+ carries 3.3 honor points under Michigan’s standard undergraduate scale, applied consistently across LSA, Ross, and Dearborn. This value stays the same for a student taking the course at Ann Arbor or Dearborn.
Is a C passing at Umich?
A C passes at Michigan and earns 2.0 honor points, along with full course credit in most programs. Grades of D- and above generally earn credit, while E does not.
Will one C ruin my 4.0 GPA?
One C lowers a cumulative GPA but does not eliminate the possibility of reaching or maintaining a 4.0 in later terms, since GPA reflects an average across every graded credit hour. The size of the drop depends on how many total credit hours factor into the calculation.
How does Rackham grading differ from undergraduate grading?
Rackham grading differs from undergraduate grading through a higher GPA floor of 3.0 for academic standing, compared to the 2.0 undergraduate floor. Some Rackham programs also list A+ at 4.3 honor points instead of the 4.0 used in most undergraduate schools.
What This Means for Your Michigan GPA
Michigan’s grading system centers on one 4.0 honor point scale applied with small variations across Ann Arbor, Dearborn, and Flint. Confirming the specific campus and school comes first, since Rackham, Public Health, and standard undergraduate programs each carry their own point nuances. From there, GPA math stays consistent: honor points divided by graded credit hours, with Pass, Credit, and the new 2027 P/NC pilot grades excluded from that total.
Students working through this system benefit from checking the underlying terms behind honor points and quality points, covered in full on the GPA definitions and terminology page, alongside a term-by-term breakdown through the cumulative versus semester GPA guide. Anyone ready to run their own numbers against Michigan’s specific scale can move directly to the University of Michigan GPA calculator for a campus-accurate result.
Can't Find Your Calculator?
Use our standard CGPA to Percentage Calculator with multiple grading scales (4.0, 5.0, 10.0) for any university worldwide.