US Grading System

The US grading system converts your percentage score into a letter grade, then maps that letter to a GPA value on a 4.0 scale. An A covers 90-100% and equals 4.0 GPA. A B covers 80-89% at 3.0 GPA. A C covers 70-79% at 2.0 GPA. A D covers 60-69% at 1.0 GPA. Anything below 60% is an F, which carries 0.0 GPA points. Most schools also use plus and minus modifiers – so a B+ equals 3.3, a plain B equals 3.0, and a B- equals 2.7. Your overall GPA is calculated by multiplying each course’s grade points by its credit hours, adding those totals together, and dividing by the number of credit hours you completed.

What Does the US Grading Scale Percentage Look Like?

The US grading scale percentage converts your raw score into one of five letter grades, each tied to a specific GPA point value.

PercentageLetter GradeGPAWhat It Means
90-100%A4.0Excellent
80-89%B3.0Good
70-79%C2.0Average
60-69%D1.0Below average
Below 60%F0.0Failing

This is the standard scale most US schools use. It’s straightforward enough on paper, but one thing catches students off guard: your school might start the A at 93%, not 90%. That’s covered in the next section.

Students who want to check exactly where their score lands can use the percentage-to-GPA calculator to get an instant result without doing the math themselves.

What Percentage Is an A Grade in the US?

An A grade in the US covers 90-100% on the standard grading scale and equals 4.0 GPA points. At schools using the alternate scale, an A starts at 93% instead of 90%, so a score of 91% would be an A- rather than a full A. The difference comes down to your institution’s specific policy.

Most four-year universities and community colleges use the 90-100% range for an A. The 4.0 value stays the same regardless of which scale your school uses. So even if the cutoff shifts slightly, the GPA impact of earning an A doesn’t change.

What Percentage Is a B Grade in the US?

A B grade in the US covers 80-89% on the standard scale and carries 3.0 GPA points. On the plus/minus system, that range splits into B+ (87-89%), B (83-86%), and B- (80-82%). This is why you’ll sometimes see 80% called a B and other times called a B-, depending on which scale your school uses.

Both numbers are technically correct – they just describe different scales. The standard 10-point scale groups everything from 80 to 89 as a plain B. The plus/minus system breaks that same band into three separate grades, each with its own GPA value. Neither is wrong; they’re different tools measuring the same range.

What Percentage Is a C Grade in the US?

A C grade covers 70-79% and equals 2.0 GPA points. In plain terms, 70% in American grades is a C – average performance, passing, but not competitive for graduate school applications. On the plus/minus system, C+ sits at 77-79% (2.3 GPA), plain C at 73-76% (2.0), and C- at 70-72% (1.7).

The C grade matters more than students often realize. Many programs require at least a C in prerequisite courses, even if D is technically a passing grade for graduation purposes. So “passing” doesn’t always mean “good enough.”

What Percentage Is a D Grade in the US?

A D grade covers 60-69% and equals 1.0 GPA points. It’s the lowest passing grade in most US schools, but passing with a D doesn’t mean you’ve satisfied every requirement. Many majors, graduate programs, and scholarship conditions require a C or better in specific courses.

Think of the D as a floor, not a goal. You passed the course, but you may need to retake it anyway if your program has a minimum grade requirement. Always check your major’s rules, not just the university’s general graduation requirements.

What Percentage Is an F Grade in the US?

An F grade applies to any score below 60% and carries 0.0 GPA points. No credit is earned, and the course typically needs to be repeated. An F stays on your transcript and gets factored into your cumulative GPA even after you retake and pass the course.

Some schools have a grade forgiveness or grade replacement policy where the newer grade replaces the F in GPA calculations. But the original F usually still shows on the transcript. Check your school’s repeat course policy before assuming the F disappears.

Why Do Some Schools Set an A at 93% Instead of 90%?

The US has no single nationally mandated grading scale. Individual schools, colleges, and universities set their own percentage cutoffs. Two distinct scales are widely used.

GradeStandard ScaleAlternate Scale
A90-100%93-100%
A-90-92%90-92%
B+87-89%87-89%
B80-89% (broad)83-86%
B-80-82%80-82%
C+77-79%77-79%
C70-79% (broad)73-76%
FBelow 60%Below 60%

On the standard scale, an A starts at 90%. On the alternate scale, A- covers 90-92% and a full A requires 93% or higher. The plus/minus breakdowns within the B and C ranges are nearly identical between the two scales – the main difference sits at the top of the A range.

This explains a common source of confusion: “Is 93% an A or a B?” Under the alternate scale, 93% is the first point of a full A. Under the standard scale, a 93% has been an A since 90%. The answer depends entirely on which scale your school uses.

For institution-specific scales, the US letter-grade scale guide breaks down how major universities define each percentage boundary.

What Percentages Do B+, B, and B- Cover?

The plus/minus system splits each letter grade band into three narrower ranges. Here’s the full table.

GradePercentageGPA Points
A+97-100%4.0
A93-96%4.0
A-90-92%3.7
B+87-89%3.3
B83-86%3.0
B-80-82%2.7
C+77-79%2.3
C73-76%2.0
C-70-72%1.7
D+67-69%1.3
D63-66%1.0
D-60-62%0.7
FBelow 60%0.0

A B+ (87-89%) sits one notch below an A- (90-92%). They’re close in percentage but carry different GPA weights – 3.3 vs. 3.7. Over a full semester of courses, that difference compounds quickly in your cumulative GPA.

Is a B- a good grade? It’s a passing grade and counts as satisfactory in most undergraduate programs. But a B- (2.7) falls below the 3.0 minimum that most graduate programs require. If you’re planning on applying to master’s programs, a pattern of B- grades will push your cumulative average toward a threshold that limits your options.

The 4.0 GPA scale guide explains in detail how each grade point value feeds into your semester and cumulative averages.

How Does Your Percentage Score Become a GPA?

Your percentage score becomes a GPA through a four-step chain: percentage to letter grade, letter grade to grade point value, grade points multiplied by credit hours, total quality points divided by total credit hours.

What GPA Points Does Each Letter Grade Carry?

Each letter grade carries a fixed GPA point value: A equals 4.0, B equals 3.0, C equals 2.0, D equals 1.0, and F equals 0.0. The plus/minus modifiers adjust those values – A- becomes 3.7, B+ becomes 3.3, B- becomes 2.7, and so on down the scale.

One detail worth knowing: A+ and A both equal 4.0 at most US schools. An A+ doesn’t push you above 4.0 on an unweighted scale, even though it represents exceptional performance. The 4.0 ceiling is a design feature of the system, not a limitation of your achievement.

How Is GPA Calculated From Percentage Grades?

GPA is calculated by multiplying each course’s grade point value by its credit hours, summing those products, and dividing by the total number of credit hours taken.

Here’s a worked example. Suppose you take three courses in one semester:

  • English (3 credits): 92% = A = 4.0 × 3 = 12 quality points
  • Biology (4 credits): 84% = B = 3.0 × 4 = 12 quality points
  • History (3 credits): 77% = C+ = 2.3 × 3 = 6.9 quality points

Total quality points: 30.9. Total credit hours: 10. GPA = 30.9 ÷ 10 = 3.09.

Notice how the Biology course (4 credits) carries more weight than the others. A higher-credit course moves your GPA more than a lower-credit one, even when the grade is the same. The how GPA is calculated guide covers every scenario including incomplete grades, repeated courses, and transfer credits.

How Does Each Letter Grade Affect Academic Standing?

Academic standing in the US ties directly to GPA thresholds, not just whether you’re passing individual courses.

  • 3.5-4.0 GPA: Excellent standing. Most institutions award Dean’s List recognition or honors status at this level.
  • 3.0 GPA (B average): Standard good standing. This is also the minimum GPA most graduate programs require for admission.
  • 2.0 GPA (C average): The floor for graduation at most US universities. Fall below this and you’re at risk.
  • Below 2.0: Academic probation territory. At many schools, dropping below 2.0 also triggers financial aid suspension.

Students monitoring their progress each term can use the cumulative GPA calculator to track exactly where they stand before grades are officially posted.

How Does the US Grading System Work Across Education Levels?

The US grading system uses the same A-to-F letter scale at every level, but the standards and consequences shift significantly between high school, college, and graduate school.

How Does the High School Grading System Work in the US?

High school grading in the US uses the standard A-to-F letter scale with GPA tracked on a 4.0 basis, though many schools also calculate a weighted GPA for advanced courses. High school GPA is the primary academic metric US colleges examine during admissions. A 3.7 or higher unweighted GPA puts students in a competitive position for selective universities.

One thing that confuses many students: high school GPA and college GPA are completely separate. College GPA starts at zero when you enroll – your high school record doesn’t carry over into your college average. Students calculating their current standing can use the high school GPA calculator or read about what a good high school GPA actually looks like for different admission targets.

How Does the College and University Grading System Work in the US?

US university and college grading uses the same A-to-F scale but tracks two separate averages: semester GPA (one term only) and cumulative GPA (every term combined). Both numbers appear on your transcript. Scholarship committees and employers typically look at cumulative GPA; academic probation decisions use cumulative GPA. Graduate school applications evaluate cumulative GPA, and some programs also look specifically at your last 60 credit hours or your major GPA.

Grading standards also vary between institutions. A 3.5 GPA at a school known for grade inflation represents different academic performance than a 3.5 GPA at an institution with rigorous standards. This doesn’t change how GPA is calculated – only how it’s interpreted. The college GPA calculator handles both standard calculations and scenarios where you’re starting from a current GPA.

How Do Graduate School Grading Standards Differ?

Graduate programs apply stricter minimum grade standards than undergraduate programs. At most US graduate schools, the minimum passing grade is B- or B, not D. Earning a C in a graduate course is considered unsatisfactory at many programs, even though C technically passes at the undergraduate level.

Medical school applicants face an additional layer: a separate science GPA calculated exclusively from biology, chemistry, physics, and math courses. Most successful medical school applicants hold a 3.7 or higher in both their overall and science GPAs. Law school admissions rank GPA alongside LSAT scores, with top programs typically requiring 3.7 or above.

What Is the Difference Between Weighted and Unweighted GPA?

An unweighted GPA treats every course equally and caps at 4.0 regardless of difficulty. A weighted GPA gives extra points for harder courses – AP, IB, and honors classes typically add 0.5 to 1.0 extra points, pushing the scale above 4.0. A student who earns a B in an AP course may end up with a higher weighted GPA than a student who earns an A in a standard class.

Not all colleges weight GPA the same way. Some admissions offices recalculate every applicant’s GPA on an unweighted basis to compare students from different schools on equal footing. Knowing which version your school reports – and which version colleges prefer – matters during the application process. The weighted GPA calculator and unweighted GPA calculator handle both calculations, and the weighted vs. unweighted GPA guide explains which number to report on different applications.

What Is the Difference Between Cumulative and Semester GPA?

A semester GPA covers only the courses taken in one specific term. A cumulative GPA is the running average across every semester you’ve completed. Both appear on your US transcript.

Semester GPA is useful for checking whether your performance is improving or declining term by term. Cumulative GPA is what graduate programs, scholarship committees, and most employers actually evaluate. If your semester GPA suddenly jumps (or drops), the cumulative GPA moves more slowly because it’s absorbing dozens of credit hours from earlier terms.

The semester GPA calculator handles single-term calculations. The cumulative GPA calculator tracks the running total and can project where you’ll land after adding new grades.

What Percentage Is Considered a Passing Grade in the US?

A passing grade in the US is technically D (60-69%) at most schools, but “passing” doesn’t always mean satisfactory. Many programs require C or better in specific courses. Graduate programs usually require B- or B. Some scholarships require maintaining a 3.0 or above, making B the effective floor for financial aid eligibility.

If you’re asking “is 60% a passing grade in the US?” the short answer is: usually yes, but check your specific program requirements. A D passes the course but may not satisfy a prerequisite or a major requirement.

What Is an AB Grade and What Percentage Does It Cover?

An AB grade isn’t a standard percentage range – it’s an intermediate grade used by some US universities, most notably the University of Wisconsin-Madison, to indicate performance sitting directly between an A and a B. An AB equals 3.5 GPA points per credit hour on a 4.0 scale.

AB doesn’t mean absent on a US transcript at schools that use it as a letter grade. It means the student’s work fell between a clear A and a clear B, and the institution chose to mark that distinction rather than rounding one way or the other. Similarly, some schools use BC as an intermediate grade between B and C, carrying 2.5 GPA points.

This trips up international students reading US transcripts because AB looks like it could mean “absent” – a meaning it does carry in many Indian university grading systems. On a US transcript from a school that uses AB as a letter grade, it’s a grade point designation, not an attendance code.

How Does the US Grade Percentage Compare to Other Countries?

The US 4.0 GPA system doesn’t convert directly to grading systems used in other countries.

  • India and Pakistan use percentage-based systems where 70-80% typically indicates good standing. A 75% in India doesn’t map neatly to a C in the US system.
  • United Kingdom universities use degree classifications – First Class, Upper Second (2:1), Lower Second (2:2), Third – rather than letter grades or GPA.
  • Germany grades on a 1.0 to 5.0 scale where 1.0 is the highest and 5.0 is failing. This is the opposite of the US system.
  • Australia uses classifications like High Distinction, Distinction, Credit, Pass, and Fail, with percentage boundaries that vary by institution.

International students converting grades for US university applications should treat any conversion as an approximation rather than an exact equivalency. The percentage-to-GPA converter gives a working estimate, but university admissions offices often evaluate original transcripts on their own terms.

What Do Pass, Satisfactory, and Credit Grades Mean on a US Transcript?

Some US courses use alternative grade designations instead of letters. Here’s what the common codes mean:

  • P (Pass): The student met the passing standard. Usually doesn’t factor into GPA.
  • S (Satisfactory): Equivalent to a C or above in most undergraduate programs. Doesn’t affect GPA.
  • CR (Credit): The student earned credit for the course. Typically equivalent to C or above for undergraduates and B or above for graduate students.
  • SE and MCR: These also map to “Pass” in the Scholaro grading database used for international transcript evaluation.

None of these letter codes represent a percentage score. They indicate that the student completed the course at an acceptable level, without attaching a specific number to their performance. The US grading terminology glossary defines every grade code that appears on American transcripts, including less common ones like WF (Withdraw Failing) and I (Incomplete).

Which GPA Calculators Are Available for US Students?

US students calculating their GPA can use different calculators depending on what they need to work out. Each calculator on this site handles a specific calculation type so the result matches your actual academic situation.

All calculators follow the standard US 4.0 grading scale. Results match the same grade point values used in the percentage and letter grade tables above.

Which US Universities Have Their Own Grading System Pages?

Every major US university applies the same A-to-F letter grade framework, but percentage cutoffs, plus/minus policies, and GPA calculation rules vary by institution. The pages below cover each university’s specific grading scale, percentage boundaries, and GPA policies so you can check exactly how your school calculates your average.

Each university page includes the institution’s official grade-to-percentage table, GPA point values, academic standing thresholds, and links to the relevant GPA calculator for that school’s system.

More universities are being added to this directory on a rolling basis. If your university isn’t listed yet, the US grading scales hub and the 4.0 GPA scale page cover the standard framework that most US institutions follow.

Frequently Asked Questions About US Grade Percentages

Is a 93% an A or a B?

93% is an A under the alternate US grading scale, where A covers 93-100%. Under the standard scale, where A starts at 90%, a 93% has been an A since 90%. The answer depends on your school’s specific grading policy.

What grade is a 90% in the US?

90% is an A under the standard US grading scale. At schools using the alternate scale, 90% is an A- (covering 90-92%), with a full A beginning at 93%.

How much is 70% in American grades?

70% is a C. Under the standard US system, C covers 70-79% and carries 2.0 GPA points.

Is 80% an A or B in the US?

80% is a B. On the standard scale, B covers 80-89%. On the plus/minus system, 80-82% is specifically a B-, worth 2.7 GPA points.

Will one B ruin a 4.0 GPA?

Yes, technically. One B (3.0) does lower a perfect 4.0. How much it drops depends on credit hours. A single 3-credit B in a 15-credit semester brings the semester GPA from 4.0 down to approximately 3.8.

Is a B+ basically an A?

A B+ (87-89%, 3.3 GPA) sits one grade below an A- (90-92%, 3.7 GPA). It’s close, but graduate programs and scholarship committees treat the gap as meaningful.

Is a B minus a good grade?

A B- (80-82%, 2.7 GPA) passes in most undergraduate programs. It falls below the 3.0 minimum most graduate programs require, so it’s acceptable but not competitive for continued academic applications.

What are the college grade levels in order?

From highest to lowest: A+ / A / A- / B+ / B / B- / C+ / C / C- / D+ / D / D- / F. Each carries a specific GPA point value on the 4.0 scale.

What is the US grading system for high school vs. college?

Both use the same A-to-F letter scale. The key difference is that high school may report weighted GPA for advanced courses, while college GPA starts fresh at enrollment. Graduate school applies stricter standards, where a C is often considered unsatisfactory.

Is 75% a passing grade in the US?

Yes, 75% passes in the US. It falls in the C range (70-79%), which carries 2.0 GPA points and satisfies general graduation requirements at most schools. Some programs and scholarships require higher.

Can't Find Your Calculator?

Use our standard CGPA to Percentage Calculator with multiple grading scales (4.0, 5.0, 10.0) for any university worldwide.